Wood pallet fence plans – The first, as in all projects, is the design. To design the fence I used the Excel computer software. Take action tables in a spreadsheet and change its separation and want to find a satisfactory and customized to the dimensions of the hollow closed design. The design Top with the hand draws some important parts of the project: When I disarmed pallets, in principle, removing nails that clamp the board’s as little as possible damage the wood. There are thousands of online tutorials to do it.
Each wood pallet fence plans of 10 tables received 7×120 cm and three 7x100cm and a thickness of 1.6cm: I booked the best tables 9,120 for horizontal beams and over the door. 15 9 remaining tables and the pallet already received, I got the 26 tables 100cm needed for vertical. And they invaded four tables 120cm used later. Before the cutting table 100cm I pulled using a plate jar, a semicircle at one end of each to make a rounded top. Then the electric grinder and an 80 grit I grind and kill every table edge.
12 Photos Gallery of: Build Wood Pallet Fence Plans
It was a thorough grinding; just remove chips and soft a little wood, a fence is not furniture: before then with all grinded boards, I started to assemble, with respect for design. Vertical tables below shoot 17cm and 23cm above, with a distance between tables 10cm. I tie white glue and screws. For wood not stillage I made a hole for each screw, a drill with a diameter slightly smaller than the screws and connect a fixture that, in addition to stopping to set the depth of the hole, performs the recess to hide the head screw:
At each crossing I put two screws diagonally. With screws and glue got strong and consistent joints: And that was the first part of the fence. But this first section is short and you have to pair it another little distance to get the desired length. The union of the two sections I made with a piece of 10 cm tables, glue and screws: The door unit was exactly the same, except that I added a cross over diagonally to give consistency. In one of the posts I screw a 1.5 x 2 x 60 strip that will stop the door.
And finally, the remaining four tables I cut four pieces to 60cm and joined two and two with glue and screws to get two tables 60cm and twice as thick as to secure the fence on the wall. White glue and sawdust collect after grinding tables, prepare a lot to cover the nail holes at the wood pallet fence plans and some deficiencies. Unpredictably, I was not aware that the floor is a terrace and screw the inserts on it would drill the tarpaulin with a risk of leakage.
To solve the problem Attach mounting posts to cement slabs used as an auction for the tile roof. Weight and large area are convinced it will support the fence. The screws were concrete and had a little longer than the plate thickness. I solved the trouble screw and cut the surplus with dermal: And I get time for the installation. The first one was vertically set on both sides of the wall, the two double discs 60cm, with three plugs and screws.