Like porches and patios, deck edging ideas provide a means of adding outdoor space to your home. If a rectangular or square cover does not fit your taste, you do not have to live with it. You can create rounded corners on the decks, or round the entire deck, with a little extra work of wood. Draw a drawing of the cover or have plans drawn up for you if you do not have the ability to design your own deck plan. Use graph paper and a scale, such as one or two boxes on the chart equals 1 foot of the property deck, as well as a compass to draw the curved edge of the deck, to make sure you get a perfect arc. Consider the length of each section of the deck to determine what lengths of wood boards to buy.
Dig the shoes with a hole digger. Place the poles for a normal deck edging ideas, following the plan you created. Instead of a straight line of posts on the front of the roof, you must install the posts so that they reach the ends of each section of the roof, which will depend on the curve of the roof. Bury each post by approximately 1/3 of its height, and pour concrete around the base of the posts. Fix the wooden planks of the house on the level where the deck will sit, with a piece of flashing between the board and the front of the house. Connect the plate or plates with screws every 6 inches to ensure a secure hold.
13 Photos Gallery of: Best Deck Edging Ideas
Connect the top of the posts, on the front edge of the cover, with wooden boards between each set of messages, creating a front support rotating. Join the boards to the posts with screws. Connect the messages on each side of the front edge of the cover to the board next to the house, to create a complete frame around the cover. Lay joists every 6 to 12 inches between the boards that frame the two sides of the deck edging ideas. Start with the longest boards on the back edge of the house deck, and work out, towards the front edges of the deck with the shorter beams, cut them with a circular saw, as needed.
Install the deck edging ideas floor boards on top of the joists so that one end sits in front of the house and the other end extends to the end of the deck. Start at the center with the longest boards, and work outward, toward the edges with the shorter boards. Use chalk to draw the curve you want at the ends of the boards to completely around the deck and corners. Use a jigsaw to make the cuts along the joints, eliminating the tips of the joints to create a rounded shape. The sand joints to get a smooth finish. You can also use plywood and attach ceramic tiles that you find attractive. Remember that wood can rot, even if treated.